HBL2625SW
 |
Gray Valox housing and flange. |
| Hubbell Wiring Device-Kellems Product Specifications | |
|---|---|
| Device Type | Flanged Inlet |
| Device Style | Twist-Lock |
| Amperage | 30A |
| Volts | 250V |
| Poles and Wires | 2 Pole, 3 Wire Grounding |
| Design Type for Flanged Inlets and Receptacles | Safety Shroud |
| Configuration Type | L6-30P |
| Enhancement | Shrouded Watertight |
| Color |  |
| Terminal Retainer Material | Clear polycarbonate |
| Blade Material | Brass |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Body Holding Screw Material | Stainless steel, Multi-drive |
| Body Contact Carrier Material | Natural White Nylon |
| Flanged Casing Material | Gray Valox |
| Mounting Screw Material | Stainless Steel 302/304 Multi-drive |
| Ratings | Molded into face |
| Catalog No. | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2,000V minimum. |
| Current Interrupting | Certified for current interrupting at full rated current. |
| Temperature Rise | Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75. |
| Terminal Accommodation | 30A #10 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | VO per UL94 or CSA 22.2 No. 0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | Type 4, 4X, 12, IP66 suitability |
| Closure Cap and Strap Material | Neoprene EPDM Blend |
| Listings | UL/CSA |
 |
